Have you ever tried pedaling a bicycle up a really steep hill? It’s pretty much impossible unless you use the right gear to increase your climbing force. Once you’re back on the straight, it’s a different story. Flick to a different gear and you can go incredibly fast: you can magically make your wheels turn round much faster than you’re pedaling. Gears are helpful in machines of all kinds, not just cars and cycles. They’re a simple way to generate more speed or power or send the power of a machine off in another direction. In science, we say gears are simple machines.


What do gears do… and how do they do it?

Gears are used for transmitting power from one part of a machine to another. In a bicycle, for example, it’s gears (with the help of a chain) that take power from the pedals to the back wheel. Similarly, in a car, gears transmit power from the crankshaft (the rotating axle that takes power from the engine) to the driveshaft running under the car that ultimately powers the wheels.

You can have any number of gears connected together and they can be in different shapes and sizes. Each time you pass power from one gear wheel to another, you can do one of three things:

Bicycle gears

  • Increase speed: If you connect two gears together and the first one has more teeth than the second one (generally that means it’s a bigger-sized wheel), the second one has to turn round much faster to keep up. So this arrangement means the second wheel turns faster than the first one but with less force. Looking at our diagram on the right (top), turning the red wheel (with 24 teeth) would make the blue wheel (with 12 teeth) go twice as fast but with half as much force.
  • Increase force: If the second wheel in a pair of gears has more teeth than the first one (that is, if it’s a larger wheel), it turns slower than the first one but with more force. (Turn the blue wheel and the red wheel goes slower but has more force.)
  • Change direction: When two gears mesh together, the second one always turns in the opposite direction. So if the first one turns clockwise, the second one must turn counterclockwise. You can also use specially shaped gears to make the power of a machine turn through an angle. In a car, for example, the differential (a gearbox in the middle of the rear axle of a rear-wheel drive car) uses a cone-shaped bevel gear to turn the driveshaft’s power through 90 degrees and turn the back wheels.

How do they do it?

Gears sound like magic, but they’re simply science in action! Look at the diagram on the right and you’ll see exactly how they work. The pair of gear wheels (top) works in exactly the same way as an ordinary pair of wheels the same size that are touching (middle); the only difference is that the gears have teeth cut around the edge to stop them slipping. But a wheel is really just a lever, so a pair of wheels that touch is like a pair of levers that touch (bottom).

Thinking of gears as levers shows exactly how they work. Suppose you turn the axle at point (1). The bar connecting points (1) and (2) moves faster and with less force at point (2) because it’s working as a lever. If you can’t see this, suppose the red bar were a spanner and you pushed at point (2) to undo a nut at point (1) in the center. Then point (1) would turn with less speed and more force. If you turn at point (1) instead, the opposite is true: you get more speed and less force at point (2). That’s the red bar, which is just touching the blue bar. As the two bars touch, they must be going at the same speed. Now the blue bar is also a lever, but it’s working the other way: like a spanner. So if we apply a force at point (2), it’s magnified by the leverage of the blue bar and we get more force (and less speed) at point (3).

Putting everything together, what do we get? We apply a certain force and speed at point (1). The red bar might give us four times the speed and a quarter of the force at point (2). But the blue bar will work the other way and maybe halve the speed and double the force. So when we get to point (3), we have twice the speed and half the force that we had at point (1). That’s what we’d expect from a pair of gear wheels where one (red) is twice the size and has twice as many teeth as the other (blue).


Why do we need gears?

Let’s think about cars. A car has a whole box full of gears—the gearbox—sitting between the crankshaft and the driveshaft. But what do they actually do?

Bicycle gears

A car engine makes power in a fairly violent way by harnessing the energy locked in gasoline. It works efficiently only when the pistons in the cylinders are pumping up and down at high speeds—about 10-20 times a second. Even when the car is simply idling by the roadside, the pistons still need to push up and down roughly 1000 times a minute or the engine will cut out. In other words, the engine has a minimum speed at which it works best of about 1000 rpm. But that creates an immediate problem because if the engine were connected directly to the wheels, they’d have a minimum speed of 1000rpm as well—which corresponds to roughly 120km/h or 75mph. Put it another way, if you switched on the ignition in a car like this, your wheels would instantly turn at 75mph! Suppose you put your foot down until the rev counter reached 7000 rpm. Now the wheels should be turning round about seven times faster and you’d be going at 840 km/h or about 525 mph!

It sounds wildly exciting, but there’s a snag. It takes a massive amount of force to get a car moving from a standstill and an engine that tries to go at top speed, right from the word go, won’t generate enough force to do it. That’s why cars need gearboxes. To begin with, a car needs a huge amount of force and very little speed to get it moving, so the driver uses a low gear. In effect, the gearbox is reducing the speed of the engine greatly but increasing its force in the same proportion to get the car moving. Once the car’s going, the driver switches to a higher gear. More of the engine’s power switches to making speed—and the car goes faster.

Changing gears is about using the engine’s power in different ways to match changing driving conditions. The driver uses the gearshift to make the engine generate more force or more speed depending on whether hill-climbing power, acceleration from a standstill, or pure speed is needed.

Photo: Bicycle gears: Bikes have two sets of different-sized gears on the wheel you pedal and the back wheel. Instead of touching directly and rotating in opposite directions, each pair of gear wheels is connected by a flexible metal chain (kept taught by a springy lever and gear-shifting mechanism called a derailleur), so they turn in the same direction; technically, gears linked this way are called sprockets. When you change gear, you shift the chain from one pair of sprockets to another. For cycling at speed, you’ll use a larger sprocket on the pedal wheel than on the back wheel.

Four different ways to use gears

I’ve made these four simple gear machines with an old construction set to illustrate a few of the ways in which we can use gears to do different jobs:

Gears for spSimple gearbox made from construction set gears designed to increase speedeed

In this simple gearbox, I’ve got (from right to left) a large gear wheel with 40 teeth, a medium wheel with 20 teeth, and a small wheel with 10 teeth. When I turn the large wheel round once, the medium wheel has to turn twice to keep up. Similarly, when the medium wheel turns once, the small wheel has to turn twice to keep up. So, when I turn the large gear wheel on the right, the small wheel on the left turns four times faster but with one quarter as much turning force. This gearbox is designed for increasing speed.


Gears fSimple gearboxor force

If I power the same gearbox in the opposite direction, by turning the small wheel, I’ll make the large wheel spin a quarter as fast but with four times as much force. That’s useful if I need to make a heavy truck go up a hill, for example.



Worm gearsWorm gear made with an erector set

Here I’m using an electric motor (the gray box on the right) and a long screw-like gear to drive a large gear wheel. This arrangement is called a worm gear. It reduces the speed of the motor to make the large wheel turn with more force, but it’s also useful for changing the direction of rotation in gear-driven machinery.



Rack and pinion gear made with an erector set

Rack and pinion gears

You’ve probably seen one of these in cliff- and hill-climbing rack railroads, but they’re also used in car steering systems, weighing scales, and many other kinds of machines as well. In a rack and pinion gear, a slowly spinning gear wheel (the pinion) meshes with a flat ridged bar (the rack). If the rack is fixed in place, the gear wheel is forced to move along it (as in a railroad). If the gear is fixed, the pinion shifts instead. That’s what happens in car steering: you turn the steering wheel (connected to a pinion) and it makes a rack shift from side to side to swivel the car’s front wheels to the left or the right. In simple weighing scales, when you load a weight on the pan at the top, it pushes a rack straight downward, causing a pinion to rotate. The pinion is attached to a pointer that rotates as well, showing the weight on the dial.


Simple illustration showing how gears give you either more speed or more force, but not both at once.

What’s the catch?

You might think gears are brilliantly helpful, but there’s a catch. If a gear gives you more force, it must give you less speed at the same time. If it gives you more speed, it has to give you less force. That’s why, when you’re going up hill in a low gear, you have to pedal much faster to go the same distance. When you’re going along the straight, gears give you more speed but they reduce the force you’re producing with the pedals in the same proportion.

Whenever you gain something from a gear you must lose something else at the same time to make up for it. If that weren’t the case, you could use gears to create energy and make what scientists call a perpetual motion machine—and that’s absolutely forbidden by a law of physics called the conservation of energy. Formally stated, it says that you can’t create or destroy energy, only convert it from one form into another. To put it more informally, as my old physics teacher used to say: “You don’t get ‘owt for nowt” or “There’s no gain without pain”!

Artwork : Gears can give you more speed, but only by giving less force; they can give more force, but only by giving less speed. This is why a pair of gears can’t create energy. With two perfect gears, you’d get exactly as much energy out as you put in; with real gears, friction, noise, air resistance and so on mean you get less energy out than you put in.


Sourced by

Recommended Posts

Leave a Comment